General information about the measurement process
The measuring process is initiated as soon as the head is at a distance of approx. 50 cm from the sensor. The LED ring lights up red, indicating that the correct measuring distance has not yet been reached. From a distance of 30 cm from the lens, the LED ring lights up green. The temperature measurement starts automatically and is completed by an acoustic signal. This happens in less than 1 second. Measurement errors are indicated by a flashing red signal and 3 short signal tones.
The process of a correct measurement
- Approach the SmartXcan, hold your head centrally above the device
- Focus the LIGHT RING with your eyes
- Slowly approach the head to the device until the LIGHT RING lights up green (distance in the range of 10-30 cm to the device)
- The measurement is finished after the short signal tone
- The LED scale shows the measurement result directly. Several symbols as well as optical and acoustic signals are displayed on the user interface of the SmartXcan. The meaning of the individual signals is as follows:
